Skip to content
HDM
All products
Available worldwideWorks with Licensed TallyPrime

Tally Security

HDM Tally OTP Login

HDM TALLY 2 FACTOR OTP LOGIN is an add-on file for TallyPrime, made for your Tally's serial number. After the usual Tally username and password, when the company opens, a small box asks for a one-time code, and the code goes to your Telegram, never to the person logging in. Tap Approve and they press Enter, or read the 6 digits out; tap Deny and Tally closes at their next Enter. Logins are reported to your phone, and one typed command makes Tally read-only within about a minute. A Tally password can be shared or seen. The OTP comes to you.

A TDL add-on for TallyPrime · the OTP goes to the owner's Telegram · yearly plan

Tally login · owner's Telegram

HDM TALLY 2 FACTOR OTP LOGIN

The OTP goes to the owner's Telegram, never to the person logging in

OTP on
Telegram @hdmtallyalertbot 6-digit OTP · valid 10 min Yearly · fails open Emergency password works offline

In Tally

PC-3
1 Tally login 2 OTP
TallyPrimeABC MOBILES 26-27
user1 is in · OTP passed

Gateway of Tally

Masters · Create · Alter · Chart of Accounts

Transactions · Vouchers · Day Book

Reports · Balance Sheet · Stock Summary

HDM TALLY 2 FACTOR OTP LOGIN - OTP

ABC MOBILES 26-27 · user1 (Data Entry) · PC-3

OTP sent to the owner. Type it, or press Enter after Approve on the phone :

Press Enter only AFTER the owner's phone shows Approved.

Box 1 of 5Enter ↵

HDM TALLY 2 FACTOR OTP LOGIN

LOCKED BY OWNER. Nothing can be saved on this Tally until the owner unlocks it from the phone. Stock count today - no billing

VouchersLedgersGroupsVoucher typesReports

HDM TALLY 2 FACTOR OTP LOGIN

Unlocked by the owner. You can save again.

Owner's phone · Telegram

ABC MOBILES

@hdmtallyalertbot

bot

🏪 ABC MOBILES

🔑 OTP 483921 for user1 on PC-3 (ABC MOBILES 26-27)

Login at 29-Sep-26 10:15. Tap Approve, or read the code out.

✅ Approve❌ Deny

✅ Approved: user1@PC-3

✅ user1 on PC-3 (ABC MOBILES 26-27) is in (OTP passed).

👤 user1 on PC-3 (ABC MOBILES 26-27) logged in at 29-Sep-26 10:15.

👤 user2 on PC-1 (ABC MOBILES 26-27) logged in OUTSIDE WORKING HOURS at 29-Sep-26 22:41.

note Stock count today - no billing

Note saved; locked Tallys will show it.

lock

🔒 Every Tally of this shop is now read-only (within about a minute; at once at the next login).

≈ 1 min

unlock

🔓 Everything unlocked (within about a minute; at once at the next login).

Messagenote Stock count today - no billinglockunlock
A TDL add-on for TallyPrime · locked to your Tally serial · bought and downloaded onlineCodes are made on HDM's server; the emergency password works without it

An illustration of the screens, not a screenshot · tap to switch light / dark

What it solves

Today

A Tally password gets shared, guessed or seen, so anyone holding it can open your books without you knowing or stopping it.

With HDM Tally OTP Login

Staff logins need your OTP or Approve tap on Telegram, logins are reported to your phone, and one command makes Tally read-only.

By the numbers

HDM Tally OTP Login, at a glance.

The short version, before the demo.

The OTP goes to
The owner
Each OTP is valid for
10 min
Tally closes after
5 failed boxes

Capabilities

What it does.

Tally asks for an OTP. Your phone gets it on Telegram, with Approve and Deny.

An OTP box after Tally's own login

When a company opens, after the usual Tally username and password, a small box titled "HDM TALLY 2 FACTOR OTP LOGIN - OTP" asks for the code before anything else. What is typed shows as symbols, never as digits. Each person passes once per Tally session; opening a second company is not asked again.

Approve or Deny on your Telegram

@hdmtallyalertbot sends you the 6-digit OTP with the person, the PC and the company, and two buttons: Approve and Deny. The OTP is valid for 10 minutes. Tap Approve and they press Enter, or read the code out for them to type. The code never appears on the screen of the person logging in.

Deny, or five failed boxes, closes Tally

After a Deny, the person's next Enter shows "Not approved (DENIED). Tally will now close." and Tally quits. A wrong code, Esc or an Enter pressed too early brings the box back with the reason, such as "the owner has not tapped Approve yet". After five boxes Tally closes, and opening it again asks for a fresh OTP.

Change User is asked too

After K: Company > Change User in a session a staff member opened, the new login is asked for the OTP within about 3 seconds, even when the switch is to the Owner login. A switch from a session the Owner opened is not asked, and moving with F3 between companies that are already open never is.

Login alerts on your phone

Logins arrive as "user1 on PC-3 (your company) logged in at 29-Sep-26 10:15", with the time from that PC's own clock. A login outside the working hours you set (09:00 to 21:00 if left blank) is marked OUTSIDE WORKING HOURS. A passed OTP also tells you the person "is in". A switch you make from your own Owner session is not announced.

A wrong code is reported

A wrong code typed in the box sends you "Wrong OTP typed by user1 on PC-3 (your company)" at once. Your own emergency password, typed while HDM's server can be reached, sends the same message, because it is checked as a code first.

Make any Tally read-only from your phone

Send the bot lock for the whole shop, lock <user> for one login or lock pc <name> for one PC; unlock lifts it the same way. Within about a minute, or at once at the next login, that Tally shows "LOCKED BY OWNER" and refuses to save vouchers, ledgers, groups and voucher types. Reports still open. A note you send first, such as note Stock count today, appears on the locked screen.

An emergency password for bad days

One password you choose when you buy, written into your file. Typed in the OTP box, it lets a login in without HDM's server and without your phone. Typed in Emergency Unlock, it lifts a lock on that one Tally until the next server check. It sits in readable text inside the file, so keep the file away from staff.

Built to fail open

A dropped internet never locks or unlocks anything: the last answer stays. When the yearly plan ends, the box says the OTP is off and one Enter opens Tally, so a missed renewal never shuts you out of your own books. On a Tally with a different serial the file does nothing and never closes Tally.

The complete toolkit

13 tools · one console

Everything inside the console.

From margin alerts to teaching the system a new word — every tool your shop needs, in one clean place. Tap any tool to see it in action.

Before you book a demo

Who this is for.

This is an expensive product that pays for itself in one kind of business and not in another. Here is the honest test, in the same words we use to qualify a sale.

This is for you if…

  • Your staff log in to Tally with passwords that could be shared, guessed or seen
  • You want to decide from your phone who works in Tally, and when
  • You want a message when somebody logs in, and to know when it is outside working hours
  • You want to stop saves on one PC, one login or the whole shop without going to the shop
  • People have left, and you are not sure who still knows a Tally password

This is NOT for you if…

  • You are the only person who ever opens Tally
  • Your Tally is Educational or trial mode, with no serial number in F1 > About. The file is made for a serial and does nothing without one
  • You want a code at the Windows sign-in or on a remote desktop login. This box is inside TallyPrime, after Tally's own login
  • You do not use Telegram, or you want the code on WhatsApp or SMS. The OTP and the alerts come only on Telegram
  • What you actually want is to know what was changed inside the books. That is HDM ACTIVITY LOG, a separate yearly add-on on the same Telegram bot

Said plainly: this guards the login to Tally and lets you make Tally read-only from your phone. It does not tell you what was changed inside the books; alerts for deleted, cancelled or edited old bills and big amounts are HDM ACTIVITY LOG. It also needs company security on in Tally, with one login per person, because a login is what it guards.

See it on your own business.

A twenty-minute Google Meet demo of HDM Tally OTP Login, in your working hours. The quote follows the same day.

Book a demo

Read this before you sign

What is not included.

Printed in the same size as everything we do include. If it is on this list it is not in the price, and finding that out now is the point.

A code at the Windows sign-in

The OTP box is inside TallyPrime, after Tally's own login. It does not guard the Windows sign-in, a remote desktop sign-in or a locked Windows screen, and it has not been tested on a rented cloud or RDP-hosted Tally.

WhatsApp, SMS, an authenticator app or backup codes

The OTP and every alert come on Telegram, from @hdmtallyalertbot, and nowhere else. There is no authenticator app and there are no printed backup codes: the one way in without your phone or HDM's server is your emergency password.

Shutting a person out

The phone lock makes Tally read-only. Vouchers, ledgers, groups and voucher types cannot be saved, but the person can still open Tally and its reports, and stock item saves and Alt+X cancel are not blocked. To remove somebody for good, change or delete their login in Tally yourself.

Alerts about what changes inside the books

This add-on sends no voucher alerts. Deleted, cancelled or edited old bills and big amounts are HDM ACTIVITY LOG, a separate yearly add-on. The Alert Settings screen shows a big-amount field, but this add-on does not send that alert.

Installation, a handover or staff logins

You get the file and the activation code, link your Telegram and load the file in Tally yourself, using the steps below. There is no install visit and no handover day, and HDM does not create Tally or Windows logins for your staff.

Stopping the file being unloaded

Anyone who can open F1 > TDLs & Add-Ons can unload the file, and the emergency password is readable inside it. HDM TDL LOCK stops the unloading and is sold separately; keeping the file away from staff is up to you.

Your Tally licence and a lost Tally password

We do not supply TallyPrime or its licence, and we cannot recover a forgotten Tally password. The OTP comes after Tally's own login and does not replace Tally's own users and security levels.

How it runs

From yes to live.

Roughly two weeks, and you know at every point what is happening and what we need from you.

Buy

Give your shop name, mobile, email and the Tally serial from F1 > About, and choose your emergency password: 6 to 24 letters, digits or @ # ! . _ -. HDM does not keep it, so write it down. Check the serial twice: a file made for a wrong serial cannot be changed, re-issued or refunded.

Get the file

After payment you get the add-on file, made for your Tally serial, and a Telegram activation code. Keep the file name exactly as it is.

Tally security on

In Tally, Alt+K > Users and Passwords: turn company security on, give each person their own login, and keep your own login at the Owner level.

Link your phone first

Open @hdmtallyalertbot in Telegram and send the activation code; it answers "Linked to" your shop. Do this before loading the file, or the first login has nobody to ask and needs the emergency password.

Load the file

F1 > TDLs & Add-Ons > F4 (Manage Local TDLs): set Load TDLs on startup to Yes, add the file's full path, press Ctrl+A, then restart Tally or press Ctrl+Alt+R.

Test it

Open the company as a staff user. Your phone shows the OTP with Approve and Deny; tap Approve and press Enter in Tally, or type the 6 digits. Then, as the Owner, set your working hours in Gateway of Tally > HDM TALLY 2 FACTOR OTP LOGIN > Alert Settings and press Ctrl+A.

Straight answers

The things you are thinking.

Including the last one, which almost nobody asks out loud — so we answer it without being asked.

My staff will be stuck waiting for me every morning.

They wait once per Tally session, not at every screen, and opening a second company is not asked again. Tap Approve from wherever you are, or read the 6 digits out on a call. A second phone, such as your partner's, can be linked to approve as well. And in Alert Settings you can excuse your own Owner login at Tally start.

I already have a Tally password. Why add an OTP?

A password can be shared, guessed, seen over a shoulder or carried out by somebody who has left. The OTP is made fresh for each login on HDM's server, lives 10 minutes and comes to your phone, so a Tally password on its own is no longer enough to start work in your books. A wrong code reaches you as an alert at once.

Why a yearly plan?

Because the OTP, the alerts and the lock run through HDM's server and the Telegram bot every day. When the plan ends nothing locks you out: the box says the OTP is off and one Enter opens Tally. Telegram reminds you 15, 7, 3 and 1 days before the last day, and renewing needs no new file.

And the one nobody asks: what happens if HDM's server is down?

New logins cannot get an OTP, because the codes are made and checked on HDM's server. Your emergency password still gets a login in, checked inside Tally with no server at all, and those logins are not reported later. A dropped connection never locks or unlocks a Tally: the last answer stays, and Emergency Unlock lifts a lock on that Tally until the server answers again. If you ever want it gone, unload the file from F1 > TDLs & Add-Ons and Tally works without it; your vouchers and masters were never touched.

FAQ

Asked and answered.

What does my staff member see when they log in?

They log in to Tally with their own username and password, as usual. When the company opens, a small box, "HDM TALLY 2 FACTOR OTP LOGIN - OTP", says the OTP was sent to the owner. They wait until your phone shows Approved and press Enter, or type the 6 digits you read out; what they type shows as symbols. If they press Enter too early, the box comes back and says the owner has not tapped Approve yet.

Is the owner asked too?

Yes, by default. In Alert Settings you can excuse the Owner role at Tally start. A Change User from a session a staff member opened is always asked, even when switching to the Owner login. A Change User from a session the Owner opened is not asked, so close Tally fully when you walk away.

What happens when I tap Deny, or someone types a wrong code?

After a Deny, their next Enter shows "Not approved (DENIED)" and Tally closes. A wrong code brings the box back, and your phone gets "Wrong OTP typed by" that user, on that PC. After five boxes Tally closes; opening it again asks for a fresh OTP.

Can someone reuse a code they saw over my shoulder?

No. Each login that is asked for an OTP gets a fresh one from HDM's server, and it expires after 10 minutes, so a code seen yesterday opens nothing today.

I lost my phone, or the internet or HDM's server is down. Can we still log in?

Type your emergency password, chosen when you bought, into the OTP box; it works without HDM's server. A second linked phone can also approve. If your phone is lost, HDM can link Telegram again on your new phone and remove the old one. While the server cannot be reached, only the emergency password gets a login in, and those logins are not reported later.

How fast does the phone lock work, and what does it block?

Usually within about a minute, and at once at the next login; a little longer while someone keeps typing a voucher. A locked Tally refuses to save vouchers, ledgers, groups and voucher types, while reports still open. Stock item saves and Alt+X cancel are not blocked. A dropped internet never locks or unlocks anything, because the last answer stays.

Will it slow Tally down?

It makes one server call about once a minute, at a quiet moment: not while a voucher or master is being typed, unless that goes on for about 4 minutes. Each call can pause Tally for a second or two. Login and Change User ask the server at once.

What happens when the yearly plan ends, and how do I renew?

Nobody is locked out: the OTP box says the OTP is off, just press Enter, and login alerts and the phone lock stop. Telegram reminds you 15, 7, 3 and 1 days before, on the last day, and weekly after it. A renewal goes by your Tally serial and is charged at the add-on's yearly price; the same file carries on with nothing to reinstall, and renewing early adds the year to the end of your plan.

Does it touch my data, and what leaves my PC?

No Tally setting is changed and the voucher save is never hooked; it writes only its own Alert Settings, when the Owner saves them. HDM's server receives the shop key, Tally serial, company name, user, role, PC name, PC clock, add-on version, the code typed and your Alert Settings values. Never a voucher, a party or a balance.

Can staff get around it?

Not by guessing: they need your Approve or the code. Know the limits, though. A Tally you opened as Owner and left open lets anyone Change User without an OTP. The file can be unloaded from F1 > TDLs & Add-Ons unless you also use HDM TDL LOCK. And the emergency password is written in the downloaded file, so keep that file where staff cannot open it.

Does it work on more than one PC, or on another Tally?

It works on any PC whose Tally shows the serial the file was made for (F1 > About), and the lock can target one PC by name. On a Tally with another serial it does nothing: no OTP, no lock, and Tally is never closed. A wrong serial cannot be changed, re-issued or refunded; a different Tally needs a new purchase.

Is there tax on the price?

No. The price is the whole amount payable to HDM, with nothing added on top. HDM is an Indian business and is not registered for any sales tax outside India, so nothing is added by us. If your country's reverse-charge rule applies to foreign software, your accountant handles it the same way as for any other overseas subscription.

See HDM Tally OTP Login on your own data.

A twenty-minute demo on Google Meet, in your working hours. You get a written quote the same day.

Replies by email, Monday to Saturday. No card needed for a demo.

Email usMon – Sat